TP-Link PPTP VPN Setup

Step 1: Go into the admin interface of the router and select a LAN address range that doesn’t interfere with your regular LAN address range. Click Save and your router will reboot.

Step 2: Access your router on the new LAN address and go into the WAN menu. Select L2TP/Russia L2TP or PPTP/Russia PPTP as your WAN connection type. It is better to use L2TP for both speed and compatibility purposes.

For server IP, use one of the server names from your setup email or see server list from our support homepage

Set IP to dynamic. This assumes that your original LAN has a working and properly configured DHCP server.

Set the WAN connection mode to automatic. Click Save. Your router may reboot. If your router becomes unresponsive, unpower it and power it back on.

Step 3: Go into the DHCP settings and make sure that it is enabled. Fill out the primary and secondary DNS values as seen below. Click Save.

Step 4: Go back to the WAN menu to make sure that your VPN connected

Related Articles